AeroLeds technical

[vlittle]

Dean:

I'm looking for installation drawings for the Aeroleds products.

I'm most interested in current draw and wiring architecture: I assume that the strobe and position lights powered from separately fused circuits.

A drawing is worth a thousand words...

Thanks, Vern Little

[Dean_aeroleds]

Originally Posted by vlittle

Dean:

I'm looking for installation drawings for the Aeroleds products.

I'm most interested in current draw and wiring architecture: I assume that the strobe and position lights powered from separately fused circuits.

A drawing is worth a thousand words...

Thanks, Vern Little

Hello Vern,

Our product datasheets can be found here:
http://www.aeroleds.com/Portals/53/P...0Datasheet.pdf
http://www.aeroleds.com/Portals/53/P...heet%20(2).pdf
http://www.aeroleds.com/Portals/53/P...0Datasheet.pdf
http://www.aeroleds.com/Portals/53/P...0Datasheet.pdf
http://www.aeroleds.com/Portals/53/P...0Datasheet.pdf
http://www.aeroleds.com/Portals/53/P...0Datasheet.pdf

Installation manuals are here:
http://www.aeroleds.com/Portals/53/P...l%20Manual.pdf
http://www.aeroleds.com/Portals/53/P...l%20Manual.pdf
http://www.aeroleds.com/Portals/53/P...l%20Manual.pdf
http://www.aeroleds.com/Portals/53/P...20Manual_2.pdf
http://www.aeroleds.com/Portals/53/P...l%20Manual.pdf

The molex connector crimping instructions are here:
http://www.aeroleds.com/Portals/53/P...tor%20Pins.pdf

If you need any help with wiring, I can provide some sample schematics and assist with any questions you might have.

Dean Wilkinson
CTO, AeroLEDs LLC

[ghatch]

Dean,

Do you have the install manuals for the NS90 also?

Thanks,
Gerry

[ghatch]

Sorry Dean. I was planning on using the Aveo leds but have decided to use Aeroleds instead.

Gerry

[Dean_aeroleds]

Hi Gerry,

The datasheet is online now, but the installation manual hasn't been posted yet. It should be online soon.

Dean Wilkinson
CTO, AeroLEDs LLC