Nut Plates- Where to Buy

[tinman]

I am looking for a cheaper source for the K1100- 06 nut plates. Vans sells them for $.48 each. I don't see them in the Spruce catalogue. These are the "dimpled" version of the nut plate. Are there cheaper suppliers out there?
Thanks

[keen9a]

At Wicks, they try to confuse you by calling them anchor nuts and using the "MS" part numbers. Note the countersunk versions have a "K" in the part number. Oh and they go for $.35.

http://www.wicksaircraft.com/catalog...686/index.html

[rv8ch]

These guys have great prices on all kinds of HW:

http://stores.ebay.com/Haire-Aviation-LLC

[fodrv7]

Might be a misprint as I see Van's list the K1100-08 as 28c.
Pete.
Australia.
I have a few spares if you want to drop over.
P

[LettersFromFlyoverCountry]

Not sure wher eyou are but if you're in Minnesota, Wipaire has a nice parts department.

[Josep ma]

Hi,

I'm looking for a place to buy this Anchor nuts,,
(I have some problems because my location is Europe and some dealers anly work with USA or Canada costumers)
I bought some of them at Oshkosh 2005 and I need around 200 more,

Any help ,, will be apreciated, thanks

[osxuser]

How about Gen-aircraft-hardware?

That is after all where you got the picture.

[Josep ma]

Originally Posted by osxuser

How about Gen-aircraft-hardware?

That is after all where you got the picture.

Thanks Stephen, jejeje!! I know where the picture is from

The question is: I tried twice to order there and no answer,
May be don't sell international orders?? ,,...
anyway I'll try again

[jcoloccia]

Are you looking for -06 or -08? If you're looking for -06, check these guys out...

http://www.bonaero.com/Nuts.htm

ms21047-l06k $.039 for 100+

That's the cheapest I've found so far.

-08's are cheaper everywhere, for some reason. Easier to manufacture? I dunno.

[Josep ma]

Thanks John,

I need 08 size

MS21047-L08K 0 to 99 0.39 100 and up 0.35

Also very nice price, I'll try to contact them