Where do these go?

Coviper · #1 03-12-2009, 08:19 AM

I've just finished the cabin plumbing for the fuel and brake lines. These 4 AN Spacers (washers) came is the bag with all of the AN tube fittings. Are these used with the fittings at the exit point of the fuselage (ie, the 2 brake lines and the 2 vent line egress fittings)? What have other builders used these for? (The lighter is for scale)

[IMG]

[/IMG]

pierre smith · #2 03-12-2009, 08:26 AM

.......under the nut on the outside,

Regards,

Jim Percy · #3 03-12-2009, 08:50 AM

I used them for the fuel tank vent lines, two per side, one inside and one outside the fuselage skin. I think I've read of others using both on the inside to make it easier to clear the longeron with the vent tube- less bend required. The main fuel lines use only rubber grommets.