Anyone can help with the exact size of the rectangular cut-out fot the Cessna switch? Can do my own experimenting but some say that it is easier to ask.
TNX and
BSTRGRDS
Mike
4X-ORV
going electric now.
__________________
Mike Raviv, 4X-ORV (res)
s/n 70434
Installing systems.
Anyone can help with the exact size of the rectangular cut-out fot the Cessna switch? Can do my own experimenting but some say that it is easier to ask.
__________________
Carlos in Arizona
EAA Chapter 538 www.chapters.eaa.org/eaa538
Wittman Tailwind W8 N53CH (built & sold)
Pazmany PL-1 N2029 (bought & sold)
RV7 - N537TC (reserved & building)
Emp, Wings & Fuse done - working on FWF
"The air is an extremely dangerous, jealous and exacting mistress. Once under the spell most lovers are faithful to the end, which is not always old age." - Winston Churchill
TNX, I have my answer.
However, if somebody at ACS can see this, they should specify the installation / removal things on the data sheet they attach to the switch.
BSTRGRDS
Mike
4X-ORV
Going electric now.
__________________
Mike Raviv, 4X-ORV (res)
s/n 70434
Installing systems.
cut-out size for the Cessna split switch
Split switch cutout
Linear Mode
