Cabin Heat Valve

[RV7ator]

All,

Anyone know if EMP.AV corporation's products are now manufactured by another? Before shuttering, they made stainless heat valves with a choice of cabin or engine side mounting, all welded, and far less spendy then the clunky, similar looking, valve Aviacorp makes (and sells through Spruce, Wicks, et al).

John Siebold

[Fearless]

One of the previous partners at EPM is now selling the boxes through a new company called Plane Innovations LLC. There is a link on Doug's home page to the new site.

[Ron B.]

I could not get the S.S. boxes (like Van's sells in alum. )from Spruce. Spruce said they were not available. Spruce sent the wrong ones , the valve control was on the cabin side not allowing the scat tubing to be mounted on the cabin side as I needed. I used the information that came with the Spruce boxes and called Plane innovations and he was very helpfull and knew just what I wanted and promptly sent them out.
Ron

[n8zg]

http://www.averytools.com/c-109-heater-boxes.aspx