VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!
- Today's Posts | Insert Pics


Go Back   VAF Forums > Avionics / Interiors / Fiberglass > GPS
Reload this Page 430W ARINC and CDI
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-17-2009, 04:03 PM
rwtalbot rwtalbot is offline
 
Join Date: Feb 2006
Location: Sydney, Australia
Posts: 251
Default 430W ARINC and CDI
G'day Everyone,

I have a small configuration issue with my Garmin 430W. I have it connected to a certified Garmin CDI as well as an AFS 3500 EFIS, with the ARINC module.

As I have a CDI with dedicated OBS knob and display, I would prefer to use this for the GPS and VOR functions within the Garmin 430W. i.e. I would like the AFS 3500 to "listen" to the settings on the CDI and display them accordingly. At present the ARINC overrides the OBS on the CDI in GPS mode.

Is there a way to have the 430W ignore the ARINC signal for the OBS setting and refer to the CDI?

Thanks
Richard
Reply With Quote
  #2  
Old 01-17-2009, 04:47 PM
odlee odlee is offline
 
Join Date: Dec 2006
Location: Greensboro,NC
Posts: 152
Default Wait until the new software from AFS arrives.
Check their website, several comments regarding the new software due shortly. Should give you the flexibility you are needing.

David
Reply With Quote
Reply

« Previous Thread | Next Thread »


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:17 PM.
Contact Us - VAFForums Home - Archive - Privacy Statement - Top

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.