|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

01-05-2009, 08:49 AM
|
|
|
|
Join Date: Feb 2008
Location: Calgary, Alberta
Posts: 999
|
|
Navaid Devices moved??
A part I sent for repair was returned undeliverable, "Moved no forwarding address". Phone, fax & address on website are now invalid.
Anybody have new contact info for Navaid Devices Inc.?
__________________
Ralph
built a few RVs, rebuilt a few more, hot rodded some, & maintained/updated a bunch more
|

01-05-2009, 09:00 AM
|
 |
|
|
Join Date: Jun 2006
Location: 8I3
Posts: 3,562
|
|
They went out of business in April of 08.
What's wrong with your unit?
__________________
Please don't PM me! Email only!
Bob Japundza CFI A&PIA
N9187P PA-24-260B Comanche, flying
N678X F1 Rocket, under const.
N244BJ RV-6 "victim of SNF tornado" 1200+ hrs, rebuilding
N8155F C150 flying
N7925P PA-24-250 Comanche, restoring
Not a thing I own is stock.
|

01-05-2009, 09:36 AM
|
|
|
|
Join Date: Feb 2008
Location: Calgary, Alberta
Posts: 999
|
|
Hmmm, would be nice if they deactivated the website.
Gyro motor pooched in the control head.
Guess I'll have to replace with a Trio head.
__________________
Ralph
built a few RVs, rebuilt a few more, hot rodded some, & maintained/updated a bunch more
|

01-05-2009, 09:41 AM
|
|
unqualified unfluencer
|
|
Join Date: Jan 2005
Location: Highland Village, TX
Posts: 4,086
|
|
Ralph, send me your home address. I have a NavAid head sitting on my shelf out at the hangar. If it still works it's yours for free.
The Zen of VAF and all that....
b,
d
__________________
Doug Reeves (your host) - Full time: VansAirForce.net since '07 (started it in '96).
- Part time: Supporting Crew Member CAE Embraer Phenom 300 (E55P) @ KDFW.
- Occasionally: Contract pilot (resume).
|

01-05-2009, 09:53 AM
|
 |
|
|
Join Date: Jun 2006
Location: 8I3
Posts: 3,562
|
|
Earlier this year I had a discussion with one of their former employees about where to get a replacement gyro motor, if/when I need one. He told me the company name which is called Micromo, and I called them and was able to get the part # for the motor. Here's the info from my notes:
micromo 1624L012S692
800-807-9166
www.micromo.com
~$200 in single unit pricing
When I spoke to Horace, the former employee that built them, he said the only reason they went with this motor was for long life, any motor will work on the gyro, but they might not live as long. I have found nearly identical motors to the Micromo which are used in model trains that should work and are significantly less expensive. I haven't had the need to change mine, but when it does I'll try one of these:
http://cgi.ebay.com/Swiss-Maxon-1625...QQcmdZViewItem
Sure you can spend some $$ to upgrade and get a superior autopilot, but if you are able to fix yours up, what do you have to lose except your time and a little bit of money.
__________________
Please don't PM me! Email only!
Bob Japundza CFI A&PIA
N9187P PA-24-260B Comanche, flying
N678X F1 Rocket, under const.
N244BJ RV-6 "victim of SNF tornado" 1200+ hrs, rebuilding
N8155F C150 flying
N7925P PA-24-250 Comanche, restoring
Not a thing I own is stock.
|

01-05-2009, 10:44 AM
|
|
|
|
Join Date: Feb 2008
Location: Calgary, Alberta
Posts: 999
|
|
Hey Doug & Bob
I'll see what these fat fingers can do with the delicate innards of the Navaid. Will report my results.
Safe flying
__________________
Ralph
built a few RVs, rebuilt a few more, hot rodded some, & maintained/updated a bunch more
|

01-05-2009, 11:49 AM
|
 |
|
|
Join Date: Jun 2006
Location: 8I3
Posts: 3,562
|
|
Ralph if you need any help don't hesitate to email or call me.
Not too long ago I was given a Navaid head unit that was in a flood. I was able to clean it out (had mud inside it) and the darn thing works like a champ. In fact its still in my -6, it works fine so why take it back out.  Kickin it old-school, Navaid-style.
__________________
Please don't PM me! Email only!
Bob Japundza CFI A&PIA
N9187P PA-24-260B Comanche, flying
N678X F1 Rocket, under const.
N244BJ RV-6 "victim of SNF tornado" 1200+ hrs, rebuilding
N8155F C150 flying
N7925P PA-24-250 Comanche, restoring
Not a thing I own is stock.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 12:09 AM.
|