It's baack (my site)

[dan]

After much disk rescue, cursing, and server rebuilding:

http://www.rvproject.com
http://www.rvproject.com/wx/
http://www.rvproject.com/wab/
http://www.rvproject.com/im/
http://www.logshare.com

)_( Dan
RV-7 N714D
http://www.rvproject.com

P.S.: R-linux saved the day. It's free and it worked great to revive at least some of the data from my dead disk.
http://www.data-recovery-software.ne...Recovery.shtml

[LettersFromFlyoverCountry]

Yeah, and it only took me about 5 seconds for Dan's site to catch a mistake I made on the seat backs. I cut all the .125 angle to length and was ready to go to town on drilling. In fact, I'd already drilled the side angles to the seat backs and was just about to start the top and bottom cross pieces.

Then, as I was about to drill on the workbench, I thought "I wonder if Dan's site is back up," so I put the drill down and went to look and, surprise, there it was.

Scroll to the page on building seatbacks and he made a reference to the .063 angle. Oh, oh. Back to the plans.....d'oh! The cross pieces are NOT .125, they're .063.

So I made up the new ones.

Gotta buy that CD.

[ohiopilot]

Wheeeeeeww...

Glad to see it back up and you back too!

Did anyone paint your plane?

[dan]

Originally Posted by ohiopilot

Did anyone paint your plane?

Nope, unless it's a really thin coat of clear.

)_( Dan