VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > RV Firewall Forward Section > Traditional Aircraft Engines
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-13-2008, 11:02 PM
glenn654 glenn654 is offline
 
Join Date: Feb 2005
Posts: 592
Default Torque/Power Charts

I searched through my Lycoming Manual (O-320-D1A 160HP) and the Lycoming website and cannot find any chart showing a torque curve. Does anyone know where I can one for my engine?

Glenn Wilkinson
Reply With Quote
  #2  
Old 09-14-2008, 12:44 AM
RichB RichB is offline
 
Join Date: Jan 2008
Location: Wellington, New Zealand
Posts: 97
Default

Nope, but if you have a chart with the power curve, you can say TORQUE = HP x 5252 ÷ RPM and figure the torque curve yourself.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 10:11 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.