Source for aluminum sheet, angle?

[cnpeters]

Where are folks sourcing aluminum sheet, angle, hinges, etc assuming I can't find it locally? It probably is the shipping that kills on this.

[flytoboat]

Carl,
Next time you drive to the Belleville/St. Louis area, make a stop at Wicks Aircraft in Highland. Not too far off your path. I'm sure they would have most of what you need. In a previous life I lived 1 block from them. You can also stop at my shop for a cold beverage...

[Webb]

Aircraftspruce was decent on shipping price. Not cheap but I didn't feel taken advantage of. They also got it out quickly.

[Rick S.]

I'll give a thumbs up to Aircraft Spruce, if you can get the EAA Visa card, the discount saved me at least the shipping costs. They package everything very well and the cost to ship is not all that bad if you keep a list in the shop and make a big order, you will save in the long run. I have not ordered a whole bunch of metal but several lengths of angle and 2 X 4 sheets to make interior panels for finishing, brackets and such..you really shouldn't need to order too much metal anyhow unless your scratch building.

[cnpeters]

Hi, Don - great tip. I'm actually driving through Sat am on I-55 on my way to Rolla (I see their hours are 8-12am Sat). Won't have time for the beverage Sat , but ??Sun on the return. I'll PM my cell to you... .

Originally Posted by flytoboat

Carl,
Next time you drive to the Belleville/St. Louis area, make a stop at Wicks Aircraft in Highland. Not too far off your path. I'm sure they would have most of what you need. In a previous life I lived 1 block from them. You can also stop at my shop for a cold beverage...

[mike109g6]

Originally Posted by cnpeters

Where are folks sourcing aluminum sheet, angle, hinges, etc assuming I can't find it locally? It probably is the shipping that kills on this.

www.onlinemetals.com
Mike H 9A/8A

[BrentHumphreys]

Originally Posted by cnpeters

Hi, Don - great tip. I'm actually driving through Sat am on I-55 on my way to Rolla (I see their hours are 8-12am Sat). Won't have time for the beverage Sat , but ??Sun on the return. I'll PM my cell to you... .

Headed to Rolla. I spent 20 years of my life expectancy there over a 4 year period. Live about an hour and a half south of there now.

[w1curtis]

Originally Posted by mike109g6

www.onlinemetals.com
Mike H 9A/8A

Price a 4' X 12' sheet of 2024-T3 0.032 sheet from Spruce and then from Onlinemetals.com.

http://www.aircraftspruce.com/catalo...eet_2024t3.php

Spruce price $190, OLM's $691! OLM has a great selection but their prices are waaay higher than Spruce.

[1flyer]

I looked at Wicks: 2024 SH-.032X4X12-T3 $178.00

[DaX]

Another reality check for me - not everyone lives 5 minutes from Aircraft Spruce.