Oil Screen -v- Oil Filter
I need to replace my cracked oil screen housing and that got me looking into alternatives to the oil screen set up. Obviously, a filter will lengthen the oil change intervals to 50 hours -v- 25, but are there any other reason I should make the change?
Why do I need a vernatherm in the Casper Labs oil filter housing? So cold oil will bypass the filter? Currently, my 0-235-C1 does not have or need an oil cooler so I don't have a vernatherm on the engine. I can't see spending $450 to convert to a filter when the screen set up works just fine.
Am I missing something here? Thoughts?
__________________
RV-7 : In the hangar
RV-10 : In the hangar
RV-12 : Built and sold
RV-44 : 4 place helicopter on order. 
Last edited by Geico266 : 05-18-2008 at 04:57 PM.
|
Linear Mode
