VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Avionics / Interiors / Fiberglass > Electrical Systems
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-08-2008, 11:06 AM
Rivethead Rivethead is offline
 
Join Date: Mar 2007
Location: Corvallis Oregon.
Posts: 680
Default which wire?

So I understand that the SL30 connects the TX lead to the dynon100. As I'm looking at my SL30 install manual pg.20 fig.9. Is the Tx line that is being refered to the lead from pin 5 on the SL30 ? Does anyone know for sure if that's right?
Reply With Quote
  #2  
Old 04-08-2008, 11:37 AM
AltonD's Avatar
AltonD AltonD is offline
 
Join Date: Sep 2005
Location: Dothan, Alabama
Posts: 1,487
Default

From looking at the SL30 and D-100 manual, you are correct. the SL30 pin 5 is the serial data TX. This should end up at the Dynon Serial receive pin 22.
Look at page 3-5 in the dynon manual, second section from the bottom.
__________________
Alton DeWeese
N526RV RV7A Tip Up, IO360 180 W/Hartzel BA prop.
Flying ~950 hours since Aug 2010
N4IDH

Construction Log
?The secret of getting ahead is getting started. The secret of getting started is breaking your complex overwhelming tasks into small manageable tasks, and then starting on the first one.?

?Mark Twain
Reply With Quote
  #3  
Old 04-08-2008, 02:51 PM
Rivethead Rivethead is offline
 
Join Date: Mar 2007
Location: Corvallis Oregon.
Posts: 680
Default

Yup I get that. I was having trouble Id'ing exactly which wire it is that comes from the SL30 to feed the D100.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:54 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.