Anyone else see crooked seat backs in their kit? I was trying to layout the holes, but when I laid the square over the long end to draw a line across, it was tapered about a 1/2" to the top flange and the raised parts. I took some pics and sent them to Vans, but I haven't heard anything back yet. Just wondering if anyone else had found similiar parts.
__________________
Dave Chapdelaine
N821RV
RV-7
Flying as of 7/2/11
Are you talking about the corrugated seatbacks? If so, and if they are not square, simply pull lengthwise on whichever side is shortest until the seatback is square. I had to do this on mine. Does this help? Good luck.
__________________
Steve M.
Ellensburg WA
RV-9 Flying, 0-320, Catto
Donation reminder: Jan. 2021
Anyone else see crooked seat backs in their kit? I was trying to layout the holes, but when I laid the square over the long end to draw a line across, it was tapered about a 1/2" to the top flange and the raised parts. I took some pics and sent them to Vans, but I haven't heard anything back yet. Just wondering if anyone else had found similiar parts.
It's like a concertina - squish it square when you drill for the edge angles.
crooked seats?
Linear Mode
