Hooker Harness Hardware

[andyrv]

I didn't receive any mounting hardware with the Hooker Harness set so I guess I need to provide it. My question is to those who have already installed them. Van's method of seatbelt mounting has the fuselage brackets squeezing a bushing. The seatbelt connector is thinner than the bushing so it rotates freely around the bushing.

On the Hookers there is a bushing is pressed into the metal and doesn't move. Is everyone clamping the fuselage brackets on that bushing so there is no movement?

Thanks,
Andy

[Vern]

Just spread the Van's seat belt brackets and insert the Hooker ends in between the Van's brackets.A slight bend might help. Mine have worked fine as described.