Low Volts on Vision Microsystem
Guys,
My good buddy helped me do my inspection on my RV8 yesterday and everything turned out great. On the way home from Indy, my Vision Microsystems gave me a warning that my volts were low. It dropped down to 11.4 coming into the pattern. I think it may be my alternator belt. It could be loose. Also, I just put a new battery in last March. I wonder if it could be my external voltage regulator. I am going to take my cowl off again and make sure my belt is tight in the first place. When I turn my master on, it is reading 12.4 volts.
Thanks,
Darren Kerns
RV8 N214TK
Taswell, IN
|
Linear Mode
