Stainless is generally standard for exhaust flange bolts to keep corossion down. Have no idea on the size and suspect could be different for veterman vs the Vans parts. Do you have a calipar? An AN3 would be just under 3/16" on the outter edges of the threads or maybe .306" AN4 would be around .245"
Stainless is generally standard for exhaust flange bolts to keep corossion down. Have no idea on the size and suspect could be different for veterman vs the Vans parts. Do you have a calipar? An AN3 would be just under 3/16" on the outter edges of the threads or maybe .306" AN4 would be around .245"
I am stuck with sticky valve issues in a rural mountain airport. I don’t have a caliper but am pretty sure this is an AN-3. I was hoping to get replacements from Spruce but failed to measure the length before I left the plane yesterday.
That hardware is cheap enough that I always buy several lengths anyway. The cost of a few extra bolts is likely to be a negligible percentage of the shipping charges from Spruce.