Anybody have Wiring Diagrams that can be modified?

[Harold Lanfear]

Being the lazy person I am; I'm looking for some -8 wiring diagrams that I can use and modify for my own (w/ TurboCad 7) rather than start from scratch.

I have begun with Bob Nuckolls diagrams, but would also like to find sub-circuits for flaps, lights, etc. Was hoping to find some in the downloads, but no joy.

Thanks in advance for any leads or circuits.

[tc1234c]

I used Vern Little's wiring diagrams in ExpressSCH as the base. I liked ExpressSCH a lot and it is free. You may find it from:

http://www.vx-aviation.com/page_3.html

I just checked the above webpage and it seems Vern has removed his wiring diagram (ExpressSCH and symbol library are still there). Follow his instructions to download the application. You can get my diagram from the following page (click "electrial.sch" to download the editable file):

http://tc1234c.googlepages.com/technicalinformation

These may not be exactly what you are looking for. However, you can make modifications very easily to suit your needs.

[vlittle]

Actually, it's still there (first link on page).
-Vern

[az_gila]

Originally Posted by Harold Lanfear

.....
I have begun with Bob Nuckolls diagrams, but would also like to find sub-circuits for flaps, lights, etc. Was hoping to find some in the downloads, but no joy.

Thanks in advance for any leads or circuits.

Harold... I think you need this download from Bob's site....

http://www.aeroelectric.com/PPS/ACAD...es/SEMINAR.DWG

It's a many page drawing, and I think it should cover the auxiliary circuits you ask about.

It's in DWG format, and my TurboCAD opens it up....

gil in Tucson

[tc1234c]

Vern,

Indeed it is there. My mistake. Your wiring diagram helped me a lot. Thanks for sharing!

[Harold Lanfear]

Thanks very much to all for the info, that's exactly what I needed to get going.