VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!
- Today's Posts | Insert Pics


Go Back   VAF Forums > Avionics / Interiors / Fiberglass > Electrical Systems
Reload this Page Hall Effect Sensor
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-02-2007, 08:50 PM
Brambo Brambo is offline
 
Join Date: Feb 2006
Location: Boulder City
Posts: 179
Question Hall Effect Sensor
I just received my Hall Effect sensor from GRT. I would like to measure amps between the battery and the alternator. I have two questions:

1) As with Dan C?s setup I have copper strip between the ANL limiter and the starter relay. Can I put the doughnut around the copper strip?

2) Is it OK if the doughnut is touching the firewall?

Thanks

Bill Rambo
RV-7A
Reply With Quote
  #2  
Old 07-02-2007, 09:55 PM
DGlaeser DGlaeser is offline
 
Join Date: May 2005
Location: Rochester Hills, MI
Posts: 878
Default Yes...
Yes to both questions. Be careful the insulation on the donut doesn't wear away if it is touching the firewall.
__________________
Dennis Glaeser CFII
Rochester Hills, MI
RV-7A - Eggenfellner H6, GRT Sport ES, EIS4000, 300XL, SL30, TT Gemini, PMA6000, AK950L, GT320,
uAvionixEcho ADSB in/out with GRT Safe Fly GPS
Reply With Quote
Reply

« Previous Thread | Next Thread »


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 07:03 PM.
Contact Us - VAFForums Home - Archive - Privacy Statement - Top

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.