VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.


Go Back   VAF Forums > Main > RV Ongoing Maintenance Issues
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-18-2020, 02:55 PM
riobison riobison is offline
 
Join Date: Jul 2011
Location: Oliver BC & Red Deer Alberta Canada
Posts: 380
Default Complete kits of assorted hardware of nuts, bolts, screws etc for our normally used c

Through the years I have been doing ok but Iím trying to improve on my inventory and now Iím going to be a lot further from a local supply.

Iím looking for suggestions on who may carry for sale the most complete kits of assorted hardware of nuts, bolts, screws etc for our normally used consumables?

Flying a RV-4

Any suggestions?

Thanks

Tim
Reply With Quote
  #2  
Old 07-18-2020, 04:19 PM
John Owen John Owen is offline
 
Join Date: May 2011
Location: Liberty, MO
Posts: 265
Default Me too

I would be interested, as well.

John
Reply With Quote
  #3  
Old 07-18-2020, 05:57 PM
plehrke's Avatar
plehrke plehrke is offline
 
Join Date: Sep 2006
Location: Defiance, MO
Posts: 1,756
Default

I have always added a few of this and a few of that on ever order when building and now doing maintenance as well. Shipping cost from Vans and Spruce are very high (spoiled by amazon prime) so adding some hardware seemed like a good idea. I hated waiting a week to get one bolt I was missing. I now have a great collection of most stuff.

Other tips is I bought and planned a big enough hardware container/system early on that allowed me to “fill in” sizes and grips. I did this because I took everything out of the hardware bags when I got my kits and organized them into the little hardware drawers.

I guess this really does not help the OP question but may help others still ordering and building.
__________________
Philip
RV-6A - flying 970+ hours
Based at 1H0 (Creve Coeur)
Paid dues yearly since 2007
Reply With Quote
  #4  
Old 07-18-2020, 06:52 PM
9GT's Avatar
9GT 9GT is offline
 
Join Date: Jan 2010
Location: Southern Michigan
Posts: 2,111
Default

I bought 5 of these when I started building and sorted all my rivets, screws, and fasteners in the bins labeled with a label maker. All are placed in order by item type and progressive size. Whenever I run low on an item, I make a running list of what I need to replenish and place an order when I am almost out of an item to save on shipping. If I need washers, I order a bag of 100 for the discount. I generally do not re-use small fasteners and replace with new shiny ones in final assembly. I throw the used ones in a separate bin to sort through in an emergency, or to use for other projects.
https://smile.amazon.com/Greenpro-33...0WAE0W9MHCSCJS
__________________
David C.
Howell, MI
RV-10: #41686 Under Construction
RV-9A: #90949 Under Construction
RV-10: #40637 Completed/Sold 2016
Cozy MKIV:#656 Completed/Sold 2007
"Donor Exempt" but donated through Dec. 2021
Reply With Quote
  #5  
Old 07-19-2020, 07:39 AM
Red Mtn flyer Red Mtn flyer is offline
 
Join Date: Jul 2017
Location: Carson City, NV
Posts: 123
Default

50 yrs wrenching, I'm still dealing with this. I currently have every AN fitting there is - EXCEPT the one I need today, and $1ks of hardware inventory. At least once a week, I'm asking around the airport for the one thingie I need, or having somebody come by asking for their absent thingie...
Long way of saying: make up a list of what you use, go to Wicks or Spruce and splurge on yourself.
And make friends....
__________________
Ben K.
A&P; RLSA - A,G,W/S Falco F-8L
50 yrs of flight and counting
Dues paid 2017 thru 2020
Reply With Quote
  #6  
Old 07-19-2020, 10:33 AM
riobison riobison is offline
 
Join Date: Jul 2011
Location: Oliver BC & Red Deer Alberta Canada
Posts: 380
Default Hardware and stuff

I still keep a running list, buy more than I need, keep the stuff that I remove if its still in decent shape and put it into an emergency can. Cant help but keep thinking that there must be a better way.

AC Spruce does have some kits listed

https://www.aircraftspruce.ca/catego...0assorted.html

but I'm not sure if this is the answer.................

Tim
Reply With Quote
  #7  
Old 07-20-2020, 06:28 AM
RWoodard's Avatar
RWoodard RWoodard is offline
 
Join Date: Jan 2005
Location: Brighton, Colorado
Posts: 447
Default

I seem to find a use for extra:

AN3A and -4A bolts from about the shortest they make through 1-1/2"
-3 and -4 nylon locknuts
standard size washers (960?) in everything from #6 to -4 in thick and thin
panhead stainless screws in #6 and #8 from short to about 1"
flat (tapered, flush) stainless screws in #6 and #8
Axle cotter pins
Copper spark plug washers
Nylon washers in #6 and #8

Of course as somebody else already said, you can have $1000's in extra hardware neatly organized in bins and still be short the exact 50 cent bolt you desperately need to go flying! Sometimes I think if Spruce shut down for a week, I could fulfill most of their orders for a month!
__________________
Rod Woodard
Brighton, Colorado (CO12)
RV-3 IO-320 Whirlwind 3-blade constant speed
Reply With Quote
  #8  
Old 07-24-2020, 06:55 PM
AV8ER's Avatar
AV8ER AV8ER is offline
 
Join Date: Dec 2017
Location: KORL - Orlando, FL
Posts: 110
Default

I looked for a commercially available kit but did not find one that met my needs so I just ordered a small quantity of EVERY size nut, washer, cotter pin, adel clamp, and RV size screw. I bought a few (4) packs of Field & Stream 360 Utility Boxes (inexpensive boxes with good closing tabs) to put all my hardware in. Harbor Freight also sells some similar boxes but the closing tabs are of poor design. I load the hardware into the adjustable size slots in the Field Stream boxes, organized by size. When one size runs out I just order them on my next order from Aircraft Spruce. I keep the various hardware in the individual bags ACS sends them in so if the box falls off the bench I have a pile of bags and not assorted hardware intermingled all over the ground. The boxes allow you to bring the parts to the work area so you don't have to run back and forth to the toolbox. I also move them back and forth between the garage and the hangar in a large Dewalt tool bag I had laying around.



__________________
- Tim
RV-10 bought not built (Thanks Carl!) www.N7ZK.com
"How's it feel to be the fastest plane in the sky? You were spanking two Cirrus planes, a Mooney, and another plane. I took screen shots" - Quote from the best wife in the world.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:00 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.