VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 06-10-2020, 10:18 AM
mturnerb mturnerb is offline
 
Join Date: Apr 2015
Location: Ponte Vedra, FL
Posts: 1,608
Default Help ID parts.....

I got my RV-10 QB wings/fuselage and empennage kit this week. Inventory done, all good, except there was one little bundle of parts that I can't reconcile against the inventory (I may just be missing them but it's 19 pages of single spaced fun).

Any help in ID'ing these parts (just tell me where they go in the airplane, I'll figure it out from there) would be appreciated. The little aluminum strip I'm not worried about - I'm sure I'll figure that one out when I get to that page in the plans.

__________________
Turner Billingsley

RV-14A built/sold N14VB
RV-12iS in progress as of October 2020
Reply With Quote
  #2  
Old 06-10-2020, 11:15 AM
AdamB AdamB is online now
 
Join Date: Dec 2008
Location: Fremont, NH
Posts: 281
Default

The longer pieces are the below the baggage door shims F-10100 on 33-3

The middle things are systems brackets for fuel and brake lines
F-1084 on 37-1

Not sure of the strip of alumn. on the right.
__________________
RV10 - #41687
http://adamsrv10.wordpress.com
N56AB Reserved
Reply With Quote
  #3  
Old 06-10-2020, 12:33 PM
cderk's Avatar
cderk cderk is offline
 
Join Date: Sep 2015
Location: Park Ridge, NJ
Posts: 809
Default

I think i have that strip on the right still sitting on my shelf, and Ive been flying for 2 months now... so whatever it is, i either didnt use it or i forgot to install it
Reply With Quote
  #4  
Old 06-10-2020, 12:59 PM
mturnerb mturnerb is offline
 
Join Date: Apr 2015
Location: Ponte Vedra, FL
Posts: 1,608
Default

Thanks for replies - very helpful!!
__________________
Turner Billingsley

RV-14A built/sold N14VB
RV-12iS in progress as of October 2020
Reply With Quote
  #5  
Old 06-10-2020, 02:39 PM
AdamB AdamB is online now
 
Join Date: Dec 2008
Location: Fremont, NH
Posts: 281
Default

Quote:
Originally Posted by cderk View Post
I think i have that strip on the right still sitting on my shelf, and Ive been flying for 2 months now... so whatever it is, i either didnt use it or i forgot to install it
I always had one screw left over when I'd take apart and put together watches as a kid.. No idea where it went or came from... Sort of like that, right? No big deal!
__________________
RV10 - #41687
http://adamsrv10.wordpress.com
N56AB Reserved
Reply With Quote
  #6  
Old 06-10-2020, 08:24 PM
Traash Traash is offline
 
Join Date: Apr 2007
Location: Montgomery, TX
Posts: 62
Default

Short ones with notches go under the front seats on the floor to hold the fuel and brake lines in place.
__________________
Joe
Reply With Quote
  #7  
Old 06-11-2020, 02:03 PM
Janekom's Avatar
Janekom Janekom is offline
 
Join Date: Jan 2006
Location: South Africa
Posts: 879
Default

The one on the right is to make you think that you have missed an important step during building
__________________
Jan Hanekom
South Africa
Approved Person nr 325
http://www.rvbits.com
RV10 - ZU-XOX - (Flying)
RV7A - ZU-JRV - (Flying)
RV10 - ZU-JVR - (Written off)
RV7 - ZU-LOL - (Flying)
RV10 - ZU-RVI - (Flying)
RV7A - ZU-MER (Bought back)
RV7A - ZU-JAD (Sold Flying)
Dues paid for 2021 WITH A SMILE
Reply With Quote
  #8  
Old 07-20-2020, 04:22 PM
Piplnr65656 Piplnr65656 is offline
 
Join Date: Aug 2017
Location: Pittsburgh PA
Posts: 17
Default

Quote:
Originally Posted by cderk View Post
I think i have that strip on the right still sitting on my shelf, and Ive been flying for 2 months now... so whatever it is, i either didnt use it or i forgot to install it
If you did the quick build, I'm in the same boat. I seem to have an extra as the was one already in the QB fuselage.
__________________
RV-10 N203DT empennage in process, fuselage on order.
Reply With Quote
  #9  
Old 07-20-2020, 08:15 PM
soloff soloff is offline
 
Join Date: Jan 2017
Location: Oxford, CT
Posts: 17
Default

The aluminum strip on the right is for page 32-4, step 1.

Just getting ready to permanently attach the cabin top next month so that part is waiting on my shelf for the install.
__________________
Scott
RV10 fuselage and tail finished. Closing up wings.
2020 Dues Paid
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:07 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.