Transponder Wiring

[Chicago]

Hello,

I have a King KT78 transponder. I plan on buying a Ameri-King AK350 encoder. The encoder comes with a cable harness. My transponder tray is missing the connector for the circuit board and antenna. Where can I get replacements? Will the wiring harness from the encoder just plug into the adapter on the tray? Is the power wires part of the encoder wiring harness?

[pczar3]

Hi Chicago! I live out southwest in Bolingbrook. I looked at some of the pictures of the King transponder. It looks like it needs a similar connector to the Narco. These are MOLEX connectors and can be bought from places like Digikey (digikey.com) and Mouser Electronics. If you have any additional information I can try to help.
Paul
N694BP reserved

[tysonb]

Check ebay - there's usually transponder install kits with new connectors... Its the same stuff you can find from mouser/newark electronics, but conviently packaged and you don't have to decipher the catalogs...

here's one

I have no association with the ebay vendor, I've just found this stuff while "window shopping"