ACK 406 ELT wiring

noelf · #1 03-03-2019, 12:36 PM

Recently there was a thread concerning the ACK 406 wiring to the Audio Alert module to the ELT control panel. I am unable to locate that specific thread.

There was a discussion on the phone jack connectors used and when / if they were straight through or reversed. Can any one point me to that thread? I have tried various search terms but have been unable to find that specific thread. Thanks.

snopercod · #2 03-03-2019, 02:25 PM

I searched for "RJ11" and this popped up. http://www.vansairforce.com/communit...ad.php?t=38298

noelf · #3 03-03-2019, 03:53 PM

No, that is not the one I am looking for. The one I am after has some wiring diagrams and talks about using "straight" vs. "cross-over" telephone cable.
But thanks for the links.

BobTurner · #4 03-03-2019, 06:24 PM

The Ack manual section 19 (trouble shooting) seems to suggest the cable should NOT be cross-over. It says if you inadvertently used a cross-over, the remote will continuously flash, and the audio alert will continually click.