VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!
- Today's Posts | Insert Pics


Go Back   VAF Forums > Main > RV General Discussion/News
Reload this Page Lord Mount Torque
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-27-2019, 04:53 PM
SeanB's Avatar
SeanB SeanB is offline
 
Join Date: Dec 2006
Location: Colorado Springs
Posts: 574
Default Lord Mount Torque
Hello!

I?m trying to find a torque setting for Lord Mounts. The manual seems to indicate tightening until you bottom out on the internal tubes. Then adjust to get the cotter pin installed. Sound correct? No torque value?

Thanks!
__________________
SEAN BLAIR V7
Colorado Springs, CO
http://www.mykitlog.com/sblair
2020 VAF SUPPORTER
Reply With Quote
  #2  
Old 01-27-2019, 05:20 PM
SeanB's Avatar
SeanB SeanB is offline
 
Join Date: Dec 2006
Location: Colorado Springs
Posts: 574
Default Answer
Found it. Per Drawing 46A (for RV 7), tighten to bottom out then torque to AN7 values.

Thanks.
__________________
SEAN BLAIR V7
Colorado Springs, CO
http://www.mykitlog.com/sblair
2020 VAF SUPPORTER
Reply With Quote
Reply

« Previous Thread | Next Thread »


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:51 AM.
Contact Us - VAFForums Home - Archive - Privacy Statement - Top

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.