|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

04-02-2007, 08:35 PM
|
 |
|
|
Join Date: Jan 2005
Location: Seattle, WA
Posts: 1,166
|
|
Garmin GNS-430W install manual?
Anybody know where to find the install manual for a GNS-430W? I have the older 430 install manual, but things have changed in the setup screens.
Specifically, I'm trying to increase the sidetone volume. I put in a higher value and push enter, but when I reboot the unit the new value doesn't seem to take.
|

04-02-2007, 09:49 PM
|
 |
|
|
Join Date: Nov 2005
Location: Auckland, New Zealand
Posts: 241
|
|
Mike's links page
Hi Dave,
Check Mike Stewart's page of links to Garmin and other stuff.
http://www2.mstewart.net:8080/Downloads/downloads.htm
Inlcudes the W versions of the 430 and 530.
Regards,
Carl
__________________
ZK-VII - RV 7A - New Zealand - NZNE - 700 hrs (2008 -2020)
http://www.rvproject.gen.nz/
TMX OF-360 (FADEC), Dual GRT H1, Garmin 430 / SL30 / 327, TT VSVG
|

04-02-2007, 09:58 PM
|
|
Banned
|
|
Join Date: May 2006
Location: Phoenix, Az
Posts: 920
|
|
I've got a new manual. 602-826-0710
|

04-03-2007, 11:40 AM
|
 |
|
|
Join Date: May 2005
Location: Canby, Oregon
Posts: 1,786
|
|
Dave, if I remember this right...
The side tone value is set at three different frequencies (I don't remember which frequencies, highest, lowest, and the middle?). Setting anywhere else has not effect, but the unit will allow you to do it.
Kent
__________________
Kent Byerley
RV9A N94KJ - IO320, CS, tipup
AFS 3500, TT AP, FLYING....
Canby, Or
|

04-03-2007, 12:13 PM
|
 |
|
|
Join Date: Jan 2005
Location: Seattle, WA
Posts: 1,166
|
|
Thanks Kent. I think that's the answer. The older install manual I have specified 3 frequencies that are allowed, but it let me set 122.75 so I used it. So all 3 need to be set? The factory setting is something like 33. I can't hear myself at all with that value. I've probably been yelling at the controllers.
I checked Mike's web page last night, but didn't see the W versions. I'll check again.
|

04-03-2007, 01:21 PM
|
 |
|
|
Join Date: Jan 2005
Location: 57AZ - NW Tucson area
Posts: 10,011
|
|
it's there.... and a GX-65 request...
Quote:
|
Originally Posted by Davepar
Thanks Kent. I think that's the answer. The older install manual I have specified 3 frequencies that are allowed, but it let me set 122.75 so I used it. So all 3 need to be set? The factory setting is something like 33. I can't hear myself at all with that value. I've probably been yelling at the controllers.
I checked Mike's web page last night, but didn't see the W versions. I'll check again.
|
Try this ....
http://www2.mstewart.net:8080/Downloads/gns430w_IM.pdf
Now, does anyone have a GX-65 Installation Manual?
gil in Tucson
__________________
Gil Alexander
EAA Technical Counselor, Airframe Mechanic
Half completed RV-10 QB purchased
RV-6A N61GX - finally flying
Grumman Tiger N12GA - flying
La Cholla Airpark (57AZ) Tucson AZ
|

04-03-2007, 03:26 PM
|
 |
|
|
Join Date: May 2005
Location: Canby, Oregon
Posts: 1,786
|
|
I remember setting mine at max value (65)?
Quote:
|
Originally Posted by Davepar
Thanks Kent. I think that's the answer. The older install manual I have specified 3 frequencies that are allowed, but it let me set 122.75 so I used it. So all 3 need to be set? The factory setting is something like 33. I can't hear myself at all with that value. I've probably been yelling at the controllers.
I checked Mike's web page last night, but didn't see the W versions. I'll check again.
|
I am hooked through a pm6000M audio panel and have a SL30 for my other radio.
Kent
__________________
Kent Byerley
RV9A N94KJ - IO320, CS, tipup
AFS 3500, TT AP, FLYING....
Canby, Or
|

04-05-2007, 09:28 AM
|
 |
|
|
Join Date: Aug 2005
Location: Pasadena CA
Posts: 2,484
|
|
Quote:
|
Originally Posted by az_gila
|
Gil, I might be able to get my hands on one. We have a GX60 we installed in our Cardinal 5 years ago (Yikes, it was that long?)... Might still have the manual kicking around.
__________________
Stephen Samuelian, CFII, A&P IA, CTO
RV4 wing in Jig @ KPOC
RV7 emp built
|

04-28-2007, 05:27 AM
|
|
|
|
Join Date: Mar 2005
Location: Marblehead, MA
Posts: 6
|
|
Quote:
|
Originally Posted by az_gila
|
If you haven't found one yet, I have a GX60/65 Install Manual on .pdf. email me @ schwarzp@yahoo.com.
Peter Schwarzenbach
RV-7 QB
|

10-09-2010, 09:50 AM
|
 |
|
|
Join Date: Aug 2007
Location: Midlothian
Posts: 147
|
|
I know this thread is older than obama but I thought I would post this any way. This is a REAL link to everything gns430 install , user, ect. please let me know if you are unable to download, these book were up to-date as of april 2010
http://www.zumodrive.com/share/7JSaMmRkMz
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 11:53 PM.
|