Skin thickness on side of tailcone RV-14?

larrys · #1 06-13-2018, 07:44 AM

I need to order an access plate and need to know the skin thickness on the side of the tailcone for the RV-14?
Would someone be next to their build and be able to let me know?
Thanks, Larry

StressedOut · #2 06-13-2018, 01:15 PM

Larry,

If you look in Section 4 of the plans, you'll find a parts list albeit not complete. In that list the material and thickness is specified.

larrys · #3 06-13-2018, 01:26 PM

Quote:

Originally Posted by StressedOut

Larry,

If you look in Section 4 of the plans, you'll find a parts list albeit not complete. In that list the material and thickness is specified.

Thanks Art!
I drove to where the plane was and took a measurement. It is .025 where I need to add the access panel.
I am grateful for your help.
Thanks, Larry

larrys · #4 06-13-2018, 01:28 PM

Quote:

Originally Posted by StressedOut

Larry,

If you look in Section 4 of the plans, you'll find a parts list albeit not complete. In that list the material and thickness is specified.

I went to Troy high school, no wonder you call yourself stressed out! Pack up and move to Colorado, it might help. But you need to hurry from all the other Cal movers. Again, thanks for your help. Let me know if you are in the area. Larry