|
-
POSTING RULES
-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|
03-28-2018, 06:45 AM
|
|
|
|
Join Date: Dec 2008
Location: League city, TX
Posts: 544
|
|
Panel/sub panel
I?m having trouble locating the manufacturer of this type of panel/ sub panel set up. I?ve seen several builders with it. Ive included a link below. Any help? Thanks.
http://www.mykitlog.com/users/displa...=218736&row=10
__________________
Mark Malone, RV7
Wings complete, SB 14 complied with, canopy and cowling in progress, Up on the gear.
N442MM reserved
http://www.mykitlog.com/MikeMike
2020 Donation gladly paid..
|
03-28-2018, 08:54 AM
|
|
|
|
Join Date: Mar 2008
Location: Dublin, CA
Posts: 1,259
|
|
Well the panel looks pretty standard. You can make a sub panel with with a flat piece and angle stiffeners pretty simply.
__________________
Ray Tonks
2020 Donation Paid
Titan IOX-370, Dual PMAGs, 9.6:1 Pistons, FM-150
RV-7 Fuselage in progress
* Cabin Interior - In progress
RV-7 SB Wings
* Both Wings fully skinned
* Fuel Tanks Complete - No leaks finally
* Ailerons Complete
* Flaps Complete
RV-7 Empennage - Complete (a little fiberglass work left)
Vans Training Kit # 2 - Complete
RV-7 Preview Plans
Vans Training Kit #1 - Complete
EAA Sheet Metal Class - Complete
|
03-28-2018, 09:28 AM
|
 |
|
|
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 3,931
|
|
Vans Oversize panel
Vans makes an oversize panel for 6,7 &9. It's 2" taller than stock. It's a rectangular blank so you have to match cut and drill it.
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 12/03/2019, plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
|
03-28-2018, 09:43 AM
|
 |
Senior Curmudgeon
|
|
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,408
|
|
Up North Aviation makes panels with the bent lower edge like your photo. and I believe Stein does also.
Probably most anybody who has the ability to cut a panel will also be able to do the bent lower flange.
__________________
Mike Starkey
VAF 909
Rv-10, N210LM.
Flying as of 12/4/2010 
Phase 1 done, 2/4/2011
Sold after 240+ wonderful hours of flight.
"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
|
03-29-2018, 07:32 AM
|
|
|
|
Join Date: Dec 2008
Location: League city, TX
Posts: 544
|
|
Thanks Mike. Stein has this sub panel setup.
__________________
Mark Malone, RV7
Wings complete, SB 14 complied with, canopy and cowling in progress, Up on the gear.
N442MM reserved
http://www.mykitlog.com/MikeMike
2020 Donation gladly paid..
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 11:00 PM.
|
Linear Mode
