Looking for master split switch ENGRAVED =Alt/Bat

[ron sterba]

Seems there are a lot available without engraving. Just want to replace what I have and not have to label panel accordingly. It looks like the Cessna split mater switch.

Ron in Oregon RV9A flying 30 hours

[ron sterba]

Got a Email from Aircraft Spruce saying their master switch is not engraved with "Alt" & "Bat" and that it is NOT required by the FAA that the switch be identified. It's my understanding that ALL ELECTRICAL SWITCHES BE IDENTIFIED. Can use some help here in locating regulatory requirements. THANKS

Ron in Oregon RV9A flying

[az_gila]

Here's an expensive Piper one...

http://www.chaparralparts.aero/99377...p/99377-56.htm

Could Spruce be mixing up labelling the switch rocker vs. the panel?

The FAA requirements for identification are usually met with panel labels.

[chrispratt]

Have you tried Aircraft Engravers at Engravers.net?

Chris

[ron sterba]

Thanks Gil, good thought.

Ron

[ron sterba]

Thanks Chris, went to their website and they have the switch covers. This is a pretty neat website on ALL engravings. Much appreciated. I'll contact them Monday.

Thanks Ron RV9A

[ron sterba]

Gil thanks , I'll contact Aircraft Spruce on labeling. Iam not sure where I bought it from but it's only been about 3 years ago.

Thanks Gil