Push the easy button!
I purchased used gun from Brown Tool a while back and just used it this afternoon to install the tank end plate and fuel level sensor. Push the easy button!  I have used the fill-a-west-caulking-tube before and it worked well, but the force needed to issue a fine, accurate bead was hard (1/16" tip). With the Semco/PPG it was so easy. Air control of a nice rivet gun. I have put the left over in the freezer and shall do the other tank plate in a couple of days.
__________________
Bill
RV-7
Lord Kelvin:
“I often say that when you can measure what you are speaking about,
and express it in numbers, you know something about it; but when you
cannot measure it, when you cannot express it in numbers, your knowledge
is of a meager and unsatisfactory kind.”
|