Firmware update for GDL-39-3D

[Plummit]

I have a 796 and a GDL-39-3D. I was going to update the firmware for the GDL-39 but I can't figure out how to do it. I bought it new but can't find a data cable to plug in to the GDL. I have the power/data cable for the 796, but nothing fits the GDL. It works great as a blue tooth ADSB receiver, but it doesn't look like you can update via blue tooth. Do I need to buy another cable to update the firmware?

~Marc

[BCP Boys]

Do you have the Garmin Pilot App on your phone or iPad? it's been a while but I'm pretty sure you can update the GDL on the Connex menue of Garmin Pilot.

[gfb]

Garmin Pilot will do it for you.

[Plummit]

No Garmin app on the phone; that's why I bought the 796 as it has a much larger screen for use as a back-up GPS.

I'll contact Garmin in the morning and see what they say.

~Marc

[g3xpert]

Originally Posted by Plummit

I have a 796 and a GDL-39-3D. I was going to update the firmware for the GDL-39 but I can't figure out how to do it. I bought it new but can't find a data cable to plug in to the GDL. I have the power/data cable for the 796, but nothing fits the GDL. It works great as a blue tooth ADSB receiver, but it doesn't look like you can update via blue tooth. Do I need to buy another cable to update the firmware?

~Marc

Hello Marc,

No problem updating the GDL 39 3D from your 796.

If you have installed Aera 796 V5.20, it will automatically download V4.80 software to the GDL 39 over RS-232 or Bluetooth.

The following power/data cable connects the Aera 796 to the GDL 39.




Thanks,
Steve

[Plummit]

Shouldn't I see something that indicates the GDL 39 is being updated via blue tooth? When the 796 is plugged into my PC, the blue tooth light goes out on the GDL39.

~Marc

Originally Posted by g3xpert

Hello Marc,

No problem updating the GDL 39 3D from your 796.

If you have installed Aera 796 V5.20, it will automatically download V4.80 software to the GDL 39 over RS-232 or Bluetooth.

The following power/data cable connects the Aera 796 to the GDL 39.




Thanks,
Steve

[g3xpert]

Originally Posted by Plummit

Shouldn't I see something that indicates the GDL 39 is being updated via blue tooth? When the 796 is plugged into my PC, the blue tooth light goes out on the GDL39.

~Marc

Hello Marc,

You will update the 796 with the computer which will then update the GDL 39 when the 796 is disconnected from the computer. The 796 Datalink information page will show you download progress and current GDL 39 software version.

Please contact us via phone or email shown below. Internet forums are not the most efficient way to receive this type of customer support.

Thanks,
Steve

[Plummit]

Originally Posted by g3xpert

Hello Marc,

You will update the 796 with the computer which will then update the GDL 39 when the 796 is disconnected from the computer. The 796 Datalink information page will show you download progress and current GDL 39 software version.

Please contact us via phone or email shown below. Internet forums are not the most efficient way to receive this type of customer support.

Thanks,
Steve

I did send an email Steve, and this was the response I got from Mike Huff:

"The GDL 39 is upgrade through the 796.

Reference page 189-190 in the 796 Pilot's Guide. Please read caution on page 190."

I looked at the referenced pages and tried to update the unit via blue tooth but couldn't see how to specify the update for the GDL-39. In addition, there is no specific information in the referenced pages of the 796 on how to accomplish the update (short of purchasing the $70 power cord that my 796 did NOT come with), eg: do I go to the GDL page for the update while I have the 796 connected?

As I type this I'm on hold with Garmin at the number you provided. The phone message says the wait time will be over 30 minutes.....::
confused:

I was hoping that someone on VAF and worked though this and could give me a more succinct answer on how to proceed.

regards
~Marc

[Plummit]

I finally got through on the phone and a tech walked me through the update process. I never would have figured out the process and the manuals (796 and GDL-39) are woefully lacking in that regard.

In any event it's done so if anyone else out there has this problem let me know; I'm what you call an "expurt" now! ;-)

~Marc

[RVbySDI]

Originally Posted by Plummit

I finally got through on the phone and a tech walked me through the update process. I never would have figured out the process and the manuals (796 and GDL-39) are woefully lacking in that regard.

In any event it's done so if anyone else out there has this problem let me know; I'm what you call an "expurt" now! ;-)

~Marc

Would you be able to post your "expurt" knowledge on the process you followed here?