|
-
POSTING RULES
-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|
04-30-2017, 04:44 PM
|
|
|
|
Join Date: Dec 2009
Location: Boulder, CO
Posts: 4,428
|
|
Cleco Farm
Here's a photo of the spring's cleco crop here in Colorado. I'm anticipating a fine harvest.
You, too, can grow a robust field of clecos like this. It's easy. Anyone can do this. All you have to do is order an RV-3B fuselage kit, make a few simple modifications, and when you attach the F-326 aft bottom fuselage skin to the fuselage frame - just this single skin - you'll have it.
You can tell when it's ready for harvest, as a certain percentage of these will turn a rich coppery color.
Dave |
04-30-2017, 05:28 PM
|
|
|
|
Join Date: Sep 2015
Location: Socal
Posts: 452
|
|
Mine have proseal all over them. How do I prevent proseal from damaging my harvest?
__________________
RV-8 N695RA flying
Working on an RV-4
Born to fly, forced to work
|
04-30-2017, 05:35 PM
|
 |
|
|
Join Date: Sep 2006
Location: Landing field "12VA"
Posts: 1,529
|
|
If you get proseal on them, they won't germinate 
__________________
Bill Boyd
Hop-Along Aerodrome (12VA)
RV-6A - N30YD - Built '98 / sold '20
RV-10 - N130YD reserved - under construction
donating monthly to the VAF - thanks, Doug 
|
04-30-2017, 06:14 PM
|
 |
|
|
Join Date: Nov 2006
Location: Savannah, GA
Posts: 1,029
|
|
Bah. Just exercise them some and keep using them, it'll work the crud out.
__________________
RV-7ER - finishing kit and systems installation
There are two kinds of fool in the world. The first says "this is old, and therefore good"; the second says "this is new, and therefore better".
|
04-30-2017, 07:01 PM
|
 |
|
|
Join Date: Oct 2012
Location: New Ulm, Minnesota
Posts: 283
|
|
That is a beautiful crop. It suppose to snow tonight so I'm not going to start planting yet.... Darn cold Minnesota
__________________
Robin Mckee
New Ulm, MN 56073
RV3b N219BB
420 hours and counting
|
04-30-2017, 07:17 PM
|
|
|
|
Join Date: Jan 2016
Location: Southwest
Posts: 1,108
|
|
Too close to home
Doing both rv9 wings at once. Have 800 clecos and wishing i had more . I am too poor to take a picture.
__________________
John S
WARNING! Information presented in this post is my opinion. All users of info have sole responsibility for determining accuracy or suitability for their use.
Dues paid 2020, worth every penny
RV9A- Status:
Tail 98% done
Wings 98% done
Fuselage Kit 98% done
Finishing Kit 35% canopy done for now
Electrical 5% in work
Firewall Forward 5% in work
www.pilotjohnsrv9.blogspot.com
|
04-30-2017, 10:55 PM
|
|
|
|
Join Date: May 2016
Location: St Albert, Alberta, Canada
Posts: 515
|
|
I just spent the day clecoing the horizontal stab skin its substructure of my RV 10. I had 650 clecos and ran out. That was a crop let me tell ya!
__________________
______________________
Randy P.
1st time builder
RV10 - QB wings and fuse. Working on cabin top
St. Albert, Alberta, Canada
Reserved:C-GRPY
|
05-01-2017, 11:35 AM
|
 |
|
|
Join Date: Mar 2008
Location: Ramona, CA
Posts: 2,367
|
|
Bumper crop! Same amount on the other wing hiding in the background.
 |
05-01-2017, 04:33 PM
|
 |
|
|
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 3,931
|
|
Cleko farm
Same here. 1,000 and I ran out on the two wings and tanks. Had to rob Peter to pay Paul and for the tanks.
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 12/03/2019, plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
|
05-01-2017, 05:10 PM
|
|
|
|
Join Date: Dec 2011
Location: Meridian ID, Aspen CO, Okemos MI
Posts: 2,641
|
|
Dave, I have some you can borrow in you need more.
__________________
rockwoodrv9a
Williamston MI
O-320 D2A
Awaiting DAR Inspection
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 02:45 PM.
|
