Whirlwind GA200L vs Catto 3 blade

		VAF Forums > RV Firewall Forward Section > Propellers
Whirlwind GA200L vs Catto 3 blade

Thread Tools

Search this Thread

Display Modes

03-09-2017, 04:52 PM

roadrunner20 roadrunner20 is offline

Join Date: Feb 2005

Location: Bay Pines, FL (based @ KCLW)

Posts: 1,955

Whirlwind GA200L vs Catto 3 blade

I'm looking at changing my vintage 2005 Catto 3 blade prop for a Whirlwind GA200L ground adjustable.

The weight is about the same & I have been dealing with an aft cg. I am 20# light on the nose and others with this setup have added a steel spacer. I opted for weight on the inside firewall. But, since I'm looking at making a change, now is the time.

Is anyone doing this with the whirlwind to compensate?
Forget about it?

Any comments regarding the whirlwind would be appreciated.

__________________
Danny "RoadRunner" Landry
Morphed RV7(formally 7A), N20DL, PnP Pilot
1190+ hours
2019 Donation Paid

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -6. The time now is 06:33 PM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.