Have read some of the threads about replacing the ends of spark plug wires. The nut that screws on to the spark plug on my RV(lyc o320) split and I want to know if I can fix the end or do I have to buy a complete single wire with the ends attached. I have no tools for ignition wire repair. Thanks
__________________
Scott Emery http://gallery.eaa326.org/v/members/semery/
EAA 668340, chapter 326 & IAC chapter 67
RV-8 N89SE first flight 12/26/2013
Yak55M, and the wife has an RV-4
There is nothing-absolute nothing-half so much worth doing as simply messing around with Aeroplanes
(with apologies to Ratty)
2019
I'd ask at your EAA chapter. Our chapter has probably a half dozen a&p's. Odds are good that your chapter will have a few, and at least one will have a junk harness at work you could cannibalize. Should be a good source for 'how-to', as well.
I got some parts were I changed the end to car plugs best thing I ever did send me a PM with you address and I will mail them right out no charge.The nut I have are for plugs with 5/8 ends that a 3/4 end wrench fit.
Bob
Spark plug wire question
PW
Linear Mode
