I thought the same thing but saw the light . . .
It would probably not be a good idea. The upper cowl has to spread a little to install and that is hard to do to spread over the fuse and tuck in the lower cowl.
And, make a rail on the lower cowl or there are just teeth to catch snag and make it difficult.
__________________
Bill
RV-7
Lord Kelvin:
“I often say that when you can measure what you are speaking about,
and express it in numbers, you know something about it; but when you
cannot measure it, when you cannot express it in numbers, your knowledge
is of a meager and unsatisfactory kind.”
|
Linear Mode
