VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Regional Forums > Texas (South)
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-25-2016, 05:08 PM
mbuehler mbuehler is offline
 
Join Date: Jun 2016
Location: Tacoma
Posts: 77
Default Rear seat throttle / rudder pedal re-installation help @ KCXO

Bit of an odd request I'm buying an RV4 out of KCXO that was equipped with full rear controls at one point, and the previous owner removed but kept them.

I have a ferry pilot that will bring it up to Seattle, but if I can have the controls back in the airplane when it is brought up, I'll be able to do the transition training with the pilot when they get here.

Is there anybody you can recommend to reinstall these? I will compensate them for their time. From what I understand it isn't that difficult to do.

Thanks!
Reply With Quote
  #2  
Old 08-25-2016, 05:55 PM
Mike S's Avatar
Mike S Mike S is offline
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,408
Default

http://www.vansairforce.net/rvcentral.htm

Give Jay a call.
__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
  #3  
Old 08-26-2016, 09:52 AM
mbuehler mbuehler is offline
 
Join Date: Jun 2016
Location: Tacoma
Posts: 77
Default

Will do, thanks!

Quote:
Originally Posted by Mike S View Post
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:15 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.