Van's baffle kit: intercylinder baffling included or not?
I called the factory, but the person on the phone was only able to send me a packing kit, which seems a little cryptic to me. What I want to know is, does the Van's baffle kit for the IO-540/RV-10 include the intercylinder pieces? You know, the ones that bridge the gap and are attached with the spring-hook?
They are a Lycoming part in the IPC, so I can see how they might be left to the builder to source that way. $78 each from Aircraft Specialties.
No, they are not. Mine were installed on the engine.
__________________
Bill
RV-7
Lord Kelvin:
“I often say that when you can measure what you are speaking about,
and express it in numbers, you know something about it; but when you
cannot measure it, when you cannot express it in numbers, your knowledge
is of a meager and unsatisfactory kind.”
No. Comes with a (new) engine. Rebuilt may or may not.
__________________
Bruce Patton
Rans S-20 Raven 796S flying since 2019 (slowly)
RV-6A 596S flying since '99 (Sold)
HP-18 5596S flying since '89
RV-10 996S flying since 2014, quick build wing and slow build fues., - dual Skyviews with complete system, two radio and not much else. Interior completely finished with Zolatone. CF plenum. 1624 lbs, FLYING after a 21.5 month build.
Van's baffle kit: intercylinder baffling included or not?
Linear Mode
