throttle disassembly
i have a question about the 800 series of throttles from acs.
it appears that the black plastic knob unscrews from the shaft that slides in the throttle body. it appears that i can remove the assembly from my subpanel if i remove the knob and push the assembly thru the subpanel.
has anyone done this? i am concerned about being able to reassemble the black knob firmly on the shaft again? do you hold the locknut with a wrench and turn the knob against the wrench?
any experience greatly appreciated.
__________________
Bob Noffs
n. wi.
dakota hawk/jab 3300 built and flying. sold 6/18.getting serious about the 12. in the hangar now as of 10/15/19
RV-12 kit as of 9/13
|
Linear Mode
