carb linkage

rvator9a · #1 12-04-2006, 08:40 PM

I am trying to hook up the mixture and throttle cables on my rv9a. I have the vans cables and a marvel shebler(sp) carb, the issue I have is that on the carb I only have the levers with no pivots for the cables to hook to. I need to identify the parts I need and where to purchase them. Thanks Bob Collins

petehowell · #2 12-04-2006, 10:23 PM

Hi Bob,

Do you have the FWF drawings from vans? They show this pretty clearly. If you don't have them, I could send you mine. If I am misunderstanding the issue, please let me know. I'm sure we could find some photos on the web as well.

rvator9a · #3 12-05-2006, 08:55 AM

Hi Pete I do not have the fwf drawings, Are the parts available from vans. I don't see them in the web store. Thanks for any info. Bob

petehowell · #4 12-05-2006, 09:04 AM

Hi Bob,

Send me your address and phone # by Private message and I'll get you the drawings - the parts should be easy to get from Vans or Spruce.

rvator9a · #5 12-05-2006, 10:01 AM

Thanks Pete, I will give vans a call before I put you to that trouble and see if they know the right parts and if they will send them to me. I will let you know if I don't have any luck. Thanks Bob