Southeast Construction class

[Bob2]

Can anyone recommend a construction class for the RV's in the Southeast area?

I am from Fayetteville, AR but travel all over the southeast. I am about to spend a lot of time in South Carolina with a project and thought I might kill some time at a RV construction class. I checked with GBI in North Carolina but they no longer offer the classes.

I learned to fly in a Cessna 172 and then had the chance to fly a Grumman Tiger. I fell in love with the Tiger, but want to be able to work on my own stuff. I have been building and hot rodding cars for years and figure if I can do frame off restorations on cars/trucks, then I surely can build and maintain my own RV. But I want to learn a little before taking the plunge.

Maybe someone in Arkansas needs a hand?

Thanks,
Bob

[N941WR]

Where in SC are you going to be?

[dmaib]

Jesse Saint in Dunnellon, FL is the first that comes to mind. There are some others in Florida. (Check the Builders Assist link on the front page of VAF).
It appears that Alexander Tech Center in GA no longer has a website, so I don't know if they are still in business.
Check with local EAA Chapters in the area, as well.

[Nova RV]

I took the EAA sheet metal class before I started working on my -14A and it was a huge help especially starting from zero metal working and riveting experience. Check out their schedule - the classes are not held that often or everywhere but maybe one is close enough for you:

http://www.eaa.org/en/eaa/aviation-e...kshop-schedule

[Bob2]

Originally Posted by N941WR

Where in SC are you going to be?

I'm going to be in Joanna, SC a lot over the next 18-24 months. I mostly drive over, but will also fly into Atlanta and Charlette. Fiigured I'd mix in a class while out away from home.

There a RV fly-in this weekend near me at Petit Jean, but work has me away and can't get to it.

I will check or the one mentioned in VA. I could take the long way home!! :-)