Trim Servo Help
Wiring Ray Allen Pitch Trim Servos (The Standard model that I assume ships with all the kits as an option)...
Ray Allen's site appears to be down right now so I can't get any more info.
I have a set of Pioneer grips with a basic monetary pitch trim switch with 3 poles:
--Up
--Common
--Down
Switches for both pilot and Co-Pilot
Obviously the Ray Allen Servos have the two wires to drive it (Not including the position wires).
Give them 12v and Ground, servo goes one way, reverse polarity, it goes the other.
There's certainly something missing... Are there some relays involved? If so, specifically what and how wired? I heard there may be an interface from Ray Allen?
Any help with details would really be appreciated....
Happy Labor Day!!!
__________________
John Walker
RV-10 N265WD
"Miss Whiskey Delta"
BPE IO-540, FULL EFII
KMYF, San Diego, Ca.
KEOS, Neosho, MO
Crew Chief
Grove Aero Super Legacy Reno Racer,
twin turbo, IO-540,
full EFII management system!
Race Coordinator STOL Drag coming to Reno, 2019
"so I got that going for me... which is nice."
|
Linear Mode
