|
-
POSTING RULES
-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|
07-20-2015, 10:55 AM
|
 |
Senior Curmudgeon
|
|
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,408
|
|
OSH PiRep-----Six cylinder E mag?
Well, OSH is officially going, it is late July, and the six cyl Emag was supposed to be shipping in June.
Anybody at OSH happen to stop off at their booth and get an update?
__________________
Mike Starkey
VAF 909
Rv-10, N210LM.
Flying as of 12/4/2010 
Phase 1 done, 2/4/2011
Sold after 240+ wonderful hours of flight.
"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
|
07-20-2015, 12:13 PM
|
|
|
|
Join Date: Dec 2011
Location: Meridian ID, Aspen CO, Okemos MI
Posts: 2,641
|
|
Mike, I just left their booth, buying 2 for my plane. There was a guy talking about it, but I didn't pay attention since I just have the 4 cyl. I will try and get back by there
__________________
rockwoodrv9a
Williamston MI
O-320 D2A
Awaiting DAR Inspection
|
07-20-2015, 12:29 PM
|
|
Senior Curmudgeon
|
|
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,408
|
|
Thanks Rocky
__________________
Mike Starkey
VAF 909
Rv-10, N210LM.
Flying as of 12/4/2010
Phase 1 done, 2/4/2011
Sold after 240+ wonderful hours of flight.
"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
|
07-20-2015, 01:25 PM
|
|
|
|
Join Date: Sep 2005
Location: La Porte texas
Posts: 11
|
|
look here hope it helps
just saw this think the info you need is here watch 1-2 I'm pumped for this too http://youtu.be/8ScOruXJ9gA |
07-20-2015, 02:54 PM
|
 |
|
|
Join Date: Jul 2009
Location: Mojave
Posts: 4,643
|
|
I scanned through both vids and did not see the PMag reference. Can you give us a time stamp (and vid) where you saw it?
__________________
WARNING! Incorrect design and/or fabrication of aircraft and/or components may result in injury or death. Information presented in this post is based on my own experience - Reader has sole responsibility for determining accuracy or suitability for use.
Michael Robinson
______________
Harmon Rocket II -SDS EFI
RV-8 - SDS CPI
1940 Taylorcraft BL-65
1984 L39C
|
07-20-2015, 08:13 PM
|
|
|
|
Join Date: Sep 2005
Location: La Porte texas
Posts: 11
|
|
oh no never saw anything on pmag thought it was the others you were looking for sorry
|
07-20-2015, 09:33 PM
|
 |
|
|
Join Date: May 2005
Location: X35 - Ocala, FL
Posts: 3,679
|
|
I asked Brad today and he said they should be shipping in August. I forgot to ask which year..... 
__________________
Jesse Saint
|
07-21-2015, 02:42 PM
|
|
|
|
Join Date: Jul 2009
Location: Mojave
Posts: 4,643
|
|
The website is updated to indicate August is the "earliest" they will start shipping:
...Our plan was to start shipping the first units in June, but that target was not met and July is not looking better. August is the earliest we can see shipments starting. We truly regret any inconvenience this may cause...
__________________
WARNING! Incorrect design and/or fabrication of aircraft and/or components may result in injury or death. Information presented in this post is based on my own experience - Reader has sole responsibility for determining accuracy or suitability for use.
Michael Robinson
______________
Harmon Rocket II -SDS EFI
RV-8 - SDS CPI
1940 Taylorcraft BL-65
1984 L39C
|
09-09-2015, 09:42 AM
|
|
Senior Curmudgeon
|
|
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,408
|
|
Just for the heck of it------------------gonna ask once again.
Anybody have one of these critters in their hands?????
Or, are they still looking for the unobtainium mine ....................
__________________
Mike Starkey
VAF 909
Rv-10, N210LM.
Flying as of 12/4/2010
Phase 1 done, 2/4/2011
Sold after 240+ wonderful hours of flight.
"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 04:19 AM.
|
Linear Mode
