|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

01-09-2015, 09:49 AM
|
|
|
|
Join Date: Oct 2009
Location: Monroe, NC
Posts: 8
|
|
New builder says Hello
Hi all,
I would like to take the opportunity to introduce myself. I live in Monroe, NC which is just a few miles SE of Charlotte. I have been interested in building my own RV-7 for years but like many, other responsibilities prevailed.
I have read these forums from time to time over the years in order to get a better understanding of what it takes to be successful in building the project. It may be possible to build without support from other builders but I do not know why anyone would want to. A large part of the appeal of this forum for me, is meeting other builders and learning from them as much as I can. Also, the friendships I see developed on the site, fly-in?s and other events are inspiring.
Prior to the New Year, I began organizing the shop, gathering tools, practice kits, and ordered the empennage for the RV-7. Now that I'm just getting started I'm sure I will have questions along the way and I look forward to getting to know everyone.
Regards,
Steve
|

01-09-2015, 11:23 AM
|
 |
Senior Curmudgeon
|
|
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,408
|
|
Welcome to VAF!
Steve,  aboard the good ship VAF.
__________________
Mike Starkey
VAF 909
Rv-10, N210LM.
Flying as of 12/4/2010
Phase 1 done, 2/4/2011 
Sold after 240+ wonderful hours of flight.
"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
|

01-09-2015, 11:59 AM
|
 |
|
|
Join Date: Jan 2005
Location: SC
Posts: 12,887
|
|
Welcome! Make sure to join chapter 309 there in Charlotte. There are a lot of good people in that chapter!
__________________
Bill R.
RV-9 (Yes, it's a dragon tail)
O-360 w/ dual P-mags
Build the plane you want, not the plane others want you to build!
SC86 - Easley, SC
www.repucci.com/bill/baf.html
|

01-09-2015, 12:08 PM
|
 |
|
|
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 3,931
|
|
Welcome
Welcome Steve. Best of luck.
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 12/03/2019, plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
|

01-09-2015, 02:33 PM
|
|
|
|
Join Date: Jan 2011
Location: Cumming, Georgia
Posts: 873
|
|
Welcome Steve,
This is a great group one I am proud to be associated with. A lot of experience on this board whether building or flying in General.
Again welcome
Jack
__________________
Smilin' Jack & Anita Hunt
N507H RV7, KJZP Jasper, GA
EAA690
APRS/ WB4JKY
Retired Corporate Pilot CFI-AI, MEL
CE500, LRJT, HS25, C650, SBJT, CL60
Hunt Aviation, LLC.
Pilot Service, IPC's Biennials.
Comm Glider
|

01-09-2015, 02:40 PM
|
|
|
|
Join Date: May 2012
Location: Harrisburg, Pa
Posts: 759
|
|
Greetings, Steve. Enjoy the adventure 
|

01-09-2015, 03:37 PM
|
|
|
|
Join Date: Jan 2013
Location: Greensboro, NC
Posts: 173
|
|
Welcome Steve.
I have a -7 standard build about half way through (Finishing kit delivers next week) at the Burlington NC airport (KBUY) so if you are ever up this way I am happy to have you take a look and share what I have learned along the way.
|

01-09-2015, 04:22 PM
|
 |
|
|
Join Date: Oct 2008
Location: Utah
Posts: 8,145
|
|
Hi Steve,
Any chance you can reverse the decision or it's too late? And why the 7? There is a perfect model 9 eh? It could do more then my buddy's RV8 
Welcome! Enjoy the building process it's a fun off road ride. Judging from you call sign you shouldn't worry about parts cost. The real money will be spent after 1st flight. Oh, one more thing - paint it before airworthiness inspection.

|

01-09-2015, 05:53 PM
|
|
|
|
Join Date: Oct 2009
Location: Monroe, NC
Posts: 8
|
|
Guys, I appreciate all the kind words.
Bill R., I know many of the members of chapter 309 as I was active there for about a year. You would probably remember me as my wife and I used to help with the young Eagles events. I intend to get reacquainted with 309 as well as meet some folk at the Rock Hill chapter.
VLAD, No deep pockets here. This will be one of those pay I as I go deals. As far as -7, my wife insist on side by side seating and I would like to do a few aerobatics. She says not with her in the plane though.
Bill V., I would like to visit with you sometime and see your project. The company I work for has locations in your area. Maybe next time I'm up that way We could meet up.
|

01-09-2015, 09:20 PM
|
 |
|
|
Join Date: Nov 2009
Location: Yardley, PA
Posts: 1,334
|
|
Welcome
Welcome Steve. You're in for a treat with the build. Ask as many questions as you need. LOTS of experience here - saved my butt countless times!
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 11:53 PM.
|