Need source for plastic stereo panel mount headphone jacks

[cccjbr6]

Does anyone know where I can buy plastic encased stereo aviation headset jacks (not in metal housings) into which I can plug aviation headsets? The GTN 650 requires stereo jacks.The jacks cannot touch the metal airframe and I want to mount them on the sides of the cockpit behind the seats.

[rv7charlie]

And another, the Switchcraft N-114BX (what I bought for my plane):
http://electronics.mcmelectronics.co...e+jack&x=0&y=0

Note that the standard Switchcraft metal jack #12B is incredibly tough, and can be insulated from the a/c chassis with fiber shoulder washers like the ones from B&C. This page lists both the mic jack, the headphone jack, and the insulating washers:
http://www.bandc.biz/insulatingwasherset1pair.aspx

Charlie

[cccjbr6]

Thanks Brian but I need them to fit the headphone and mic jacks on the aviation heasdet. This is a 1/8 inch jack.

Originally Posted by Brantel

Here is one....

[rv7charlie]

I've never seen a 1/8" *aviation* headphone jack. All I've seen are 1/4" (0.250"). The *mic* jacks are something like 0.205"; slightly smaller than the headphone jack (see the B&C page).

If you're actually looking for 1/8" stereo headphone jacks (as for ipad/ipod/etc), that's going to be a bit tougher to find.

Charlie

[az_gila]

Originally Posted by cccjbr6

Thanks Brian but I need them to fit the headphone and mic jacks on the aviation heasdet. This is a 1/8 inch jack.

I believe that would be these...

http://www.mouser.com/ProductDetail/...%252bOJg3fo%3d

and

http://www.mouser.com/ProductDetail/...H0hoay5LxZw%3d

[Brantel]

Originally Posted by cccjbr6

Thanks Brian but I need them to fit the headphone and mic jacks on the aviation heasdet. This is a 1/8 inch jack.

Sorry I am brain dead this morning and reading on a phone....

[rleffler]

Jacks in all three sizes are available with insulated chassis. Fiber washers work good too. I installed my headsets with fiber washers and the 1/8" music jack with a part that had an insulated chassis. I don't have the part numbers handy at work, but should be easy to find with Google.