VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!
- Today's Posts | Insert Pics


Go Back   VAF Forums > Avionics / Interiors / Fiberglass > Engine Monitors
Reload this Page Skyview + GRT CS-02
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-04-2014, 10:29 AM
kpaulsen kpaulsen is offline
 
Join Date: Sep 2009
Location: Park City, Utah
Posts: 13
Default Skyview + GRT CS-02
I would like to use the GRT CS-02 to measure current with my Skyview EMS220. Has anyone been able to characterize this and create a workable sensor definition for the sensor configuration file?
__________________
Karl Paulsen
RV7 - N485KP
TMX-IO360, Hartzell Prop, Dynon Skyview
Park City, UT
Reply With Quote
  #2  
Old 08-04-2014, 02:32 PM
RONSIM's Avatar
RONSIM RONSIM is offline
 
Join Date: Feb 2008
Location: Largo, FL
Posts: 1,027
Default Just curious, why the -02?
Dynon supports the CS-01, which I am using on my 120 --- why are you going with the -02?
__________________
RV-10 Co-built, maintained, flown (sold)
RV-8A Maintained and flown (Sold)
RV-6A Bought and Flying (N177RV), upgrades $$$
IO360, 180HP/CS, AFS 5600T, D10A, G650, G430, G327, ADS-B, VIZ385 AP
Very Happy Contributor
Comm, SMEL, CFII, A&P
Based at KCLW (Clearwater, FL)
Reply With Quote
  #3  
Old 08-04-2014, 03:36 PM
kpaulsen kpaulsen is offline
 
Join Date: Sep 2009
Location: Park City, Utah
Posts: 13
Default Skyview + GRT CS-02
Because I happen to have one laying around and would rather not purchase a CS-01 if I don't have to. This is for my standby ALT which is only 20amps so CS-02 should be adequate.
__________________
Karl Paulsen
RV7 - N485KP
TMX-IO360, Hartzell Prop, Dynon Skyview
Park City, UT
Reply With Quote
  #4  
Old 08-26-2014, 10:20 PM
lrgabriel lrgabriel is offline
 
Join Date: Jun 2012
Location: Reno, NV
Posts: 64
Default
Have you had any luck solving this? I have a CS-02 on my secondary alternator as well, and would like to read it!
Reply With Quote
  #5  
Old 08-27-2014, 03:01 PM
kpaulsen kpaulsen is offline
 
Join Date: Sep 2009
Location: Park City, Utah
Posts: 13
Default Skyview + GRT CS-02
Nothing yet I've wired it up and selected the configuration for the CS-01 in the sensor setup but Skyview doesn't even recognize the CS-02. If you have any hints would appreciate any input.
__________________
Karl Paulsen
RV7 - N485KP
TMX-IO360, Hartzell Prop, Dynon Skyview
Park City, UT
Reply With Quote
Reply

« Previous Thread | Next Thread »


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 10:30 AM.
Contact Us - VAFForums Home - Archive - Privacy Statement - Top

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.