nut plate call outs 22-02 step 3

[dbhill916]

Hi Guys,

Don't tell my medical examiner, but I must be going blind. Step 3 of 22-02 states "rivet nut plates... ... to the F-1201C Firewall Bottom per the callouts in figure 1 and figure 4." For the life of me, I can't find any callouts for the Firewall Bottom in those figures. I note that there appear to be nut plates to be installed at the gascolator attach holes, but I can't see the callout to tell me which nut plates to install.

(I'll probably see the callout as soon as I post this )

Thanks in advance,
-dbh

[Gandalf]

22-02 Step 3

You do not need to dimple the nut-plates on the ribs since the ribs are machine countersunk, not dimpled. There are no nut-plates in the firewall to rivet at this point (See Marty Santic).

Have fun,
Jeff

https://sites.google.com/site/jalcom...build/fuselage

[Jim T]

I'm pretty sure the one they're talking about is the nutplate for the return line clamp that's called out in figure 4. The nutplates for the gasolater get riveted in a later step.

Jim

[AF_Alan]

I dont have the plans in front of me but... Gascolator nutplates (2x) are -3. Single nutplate for fuel return line is -8.

Good luck