VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Main > RV General Discussion/News
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-26-2014, 02:06 PM
danielabernath danielabernath is offline
 
Join Date: Feb 2014
Location: Ft Myers, Florida KFMY
Posts: 145
Default Take out Van's navigation and put in Garm 696?

I have acquired a used Garmin 696.
But I have a newer 2011 Van's Standard Avionics Package with Garmin 495 GPS.

Should I take out the Garmin 495 and put in the Garmin 696?
NOW: 12 fuses on far left then Dyson then middle Garmin 495 top, radio bottom,
then on far right, another dyson.

I also have the AOPA naviation on a mini pad. How can I most efficiently set this up without it looking like the Ginza at Midnight.

Last edited by danielabernath : 03-26-2014 at 02:15 PM. Reason: completeness
Reply With Quote
  #2  
Old 03-26-2014, 02:53 PM
flightlogic's Avatar
flightlogic flightlogic is offline
 
Join Date: Nov 2013
Location: Prescott, AZ
Posts: 1,613
Default

Might depend on your eyesight. I bought my 9 with a smaller Garmin. Sold it here on Van's and bought a used 696. The difference is huge... pardon the expression. 696 size is great and bright screen. Some of the older small units were not as bright. It is now displaying ADS-B traffic and WX also. Had to do a firmware update. I like buttons and knobs, don't like fingerprints on touch screens. Just me.
__________________
"Kindness is never a bad plan."

exemption option waived. Donation appropriate.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:44 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.