EAA tech inspection needed
I'm at a point where I would very much like to have another EAA tech inspector put an eyeball on my plane (I've had two so far, one at the empennage stage and another halfway through the fuse), but my local EAA chapter (123) is on the very LOW side of activity and does not currently have a tech inspector. My project is located near Garden City, TX and I'll be happy to pick up and drop off an inspector in my 172 from any surrounding area if I can get someone to lay eyes on it for me.
Anybody in Midland, Lubbock, Abilene, Big Spring, San Angelo area?
*EDIT* - there is a second project in Garden City as well, a 7 belonging to Mike Hilger, he would like to have someone look at his at the same time if we can arrange it. This is starting to sound like an all-day Saturday project with ribs on the pit.
__________________
Greg Niehues - SEL, IFR, Repairman Cert.
Garden City, TX VAF 2020 dues paid 
N16GN flying 700 hrs and counting; IO360, SDS, WWRV200, Dynon HDX, 430W
Built an off-plan RV9A with too much fuel and too much HP. Should drop dead any minute now. 
Last edited by airguy : 01-08-2014 at 11:56 AM.
|
Linear Mode
