Source for manifold pressure tee.

[dwilson]

I have two things that need manifold pressure.
Lightspeed ignition
GRT manifold pressure sensor.

I have Van's manifold pressure tubing and bulkhead penetration kit installed.

I need a tee or splitter to come off of Van's kit and go to both devices.

Anyone have a slick way to do this?

I have looked on the internet with google and cannot find any "barbed" tees that would do the job.

Thanks

Duane

[captainron]

Try- Pep Boys

[dan]

http://www.mcmaster.com has polycarbonate barbed tees and reducers, which is what I used for a similar setup (LSE Plasma II + AF-2500).