VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 11-18-2013, 04:27 PM
Rayh's Avatar
Rayh Rayh is offline
 
Join Date: Sep 2013
Location: Kingsland, GA
Posts: 82
Smile Newbie

I am excited about just ordering my first RV12 kit. After meeting with Mitch in MD and going on a demo, I was sold. Better yet, my wife was sold!
Cannot wait to get it delivered and started. I have a question. My friend just built an RV6 and going to lend all of his tools to me. Which clecos are mostly used for the 12 and how many is recommended to have on hand?
Thanks
Ray in WV
Reply With Quote
  #2  
Old 11-18-2013, 04:42 PM
rgmwa rgmwa is offline
 
Join Date: Feb 2010
Location: Perth, Western Australia
Posts: 1,675
Default

My Isham toolkit came with 350 copper and 50 silver clecos. That was enough, but more is always good. What's your kit number?
__________________
rgmwa
RV-12LR 912ULS
120346
Reply With Quote
  #3  
Old 11-18-2013, 04:49 PM
ppilotmike's Avatar
ppilotmike ppilotmike is offline
 
Join Date: Jan 2010
Location: Denver, CO
Posts: 2,013
Default +1 for "more"

IMHO, you can't have too many. Besides, later, if you sell them, they maintain their value pretty well. My advice, is to get a pneumatic cleco runner if your friend didn't have one. The benefit is that you don't develop the handshake clutch of death from using the cleco pliers. The drawback is you don't get the handshake clutch of death, which can be quite useful for negotiations with friends...
__________________
Mike Rettig
EAA Chapter 301 www.eaa301.org
VAF Dues Current
RV-10 - Working on engine / prop installation
http://www.mykitlog.com/users/index....ig&project=803
F-14 (Pedal Plane - Daughter's Project) "Flying"
https://www.youtube.com/watch?v=zKCyX2FXrlw
Reply With Quote
  #4  
Old 11-18-2013, 05:00 PM
Rayh's Avatar
Rayh Rayh is offline
 
Join Date: Sep 2013
Location: Kingsland, GA
Posts: 82
Default

I don't have the Kit number yet. I emailed the order form in and used the webstore tpo make the payment. Maybe tomorrow I will know something.
Reply With Quote
  #5  
Old 11-18-2013, 05:02 PM
Rayh's Avatar
Rayh Rayh is offline
 
Join Date: Sep 2013
Location: Kingsland, GA
Posts: 82
Default

Handshake clutch of death would definitely be useful at times. lol
But a pneumatic cleco runner sounds like a good thing to have.
Reply With Quote
  #6  
Old 11-18-2013, 06:41 PM
Mike S's Avatar
Mike S Mike S is online now
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 16,096
Default Welcome to VAF!

Hey Ray, welcome aboard the good ship VAF
__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
  #7  
Old 11-19-2013, 01:27 AM
XOverZero's Avatar
XOverZero XOverZero is offline
 
Join Date: Aug 2010
Location: Irvine, CA
Posts: 427
Default

Hi Ray, and let me add a welcome, too.

If it wasn't clear in previous posts, please note that the RV-12 requires many more copper (⅛") clecos than silver (3/32"), which is just the opposite of what you may find in a tool kit designed for the RV-6. The difference is that the -12 uses mostly -4 blind rivets instead of -3 solid rivets. Big difference. You will need at least 350 copper clecos, and not very many silver ones.

The comments about 'handshake clutch of death' are well taken, and should be taken seriously. Squeezing all those clecos by hand is one of the surest ways to develop a persistent case of lateral epicondylitis (AKA tennis elbow), which if you haven't experienced it, hurts?quite a bit. My advice is not to chance it. It's wisest to consider the pneumatic cleco runner a must have.

Good luck and hope you enjoy the build. It's a lot of fun!
__________________
John Halcrow
Tustin, CA
RV-12 120682
Emp/TC done; Wings done; Fuse kit done

"Keep flying. Malcolm Reynolds
Paid up until Aug 2022
Reply With Quote
  #8  
Old 11-19-2013, 02:12 PM
Rayh's Avatar
Rayh Rayh is offline
 
Join Date: Sep 2013
Location: Kingsland, GA
Posts: 82
Default

Thanks for all of the replies. I will definitely be checking out the pneumatic cleco runner. I have been offered the use of my friend's pneumatic rivet puller and will take him up on that offer also.
Reply With Quote
  #9  
Old 11-20-2013, 07:35 AM
John-G John-G is offline
 
Join Date: Jan 2012
Location: Northeast Ohio
Posts: 759
Default Consider More Silver Clecos

Ray,

The 50 silver #40 Clecos suggested WILL get the job done. However, that said, the only area where I wish I had more silver Clecos thus far was when match drilling the parts for the roll bar. Yes, I was able to get the job done with 50 but it was a hassle to constantly move Clecos around from one portion of the roll bar to another. I would have liked to have an additional 50 silver Clecos for that job because guessing there must be at least 200 holes in the roll bar components.

During assembly of the roll bar, I plan on borrowing extra silver Clecos from another RV builder in my area.

Building the RV-12 is a lot of fun. Happy building!
__________________
John
http://www.dogaviation.com/

RV-12 Wings, Empennage, Fuselage, Finishing, Avionics and Powerplant kits all completed
Now Flying!!

Donation paid until September 2021
Reply With Quote
  #10  
Old 11-21-2013, 01:01 PM
Rayh's Avatar
Rayh Rayh is offline
 
Join Date: Sep 2013
Location: Kingsland, GA
Posts: 82
Default

Thanks John, I will keep that in mind. I live on an airpark and there are some clecos nearby that I will be able to borrow when needed.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:30 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.