VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Avionics / Interiors / Fiberglass > Electrical Systems
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-29-2013, 11:58 AM
Berchmans Berchmans is offline
 
Join Date: Nov 2009
Location: Anchorage, Alaska
Posts: 456
Default Dynon Remote Compass Module

This is just a for what it?s worth write-up about the installation of the Dynon remote compass module and the use of shielded wire. My remote compass is installed in the wingtip of my RV-8. In the wing tip I also have the Whelan LED Nav/Strobe light and an AERO Sun Landing light with Wig/Wag active. I ran all the wiring for the Nav, Landing, and remote compass in the same conduit. All the wiring is shielded cable with shielding grounded. I can detect no interference between the remote compass and the lighting systems.
__________________
Burke Wick
Flying RV 8
Anchorage, Alaska
VAF Dues Paid for 2020
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 07:15 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.