Serrated throttle lever

[Vansrv7arob]

SERRATED THROTTLE LEVER of various lengths? I need one for a matti tuck io360?? The one I have doesn't give me the clearance I need.

centre to centre needs to be at least 2 1/4
inches.

11/16 dia serration - 24 serrations

3/32 wide

3/8 shaft

[rzbill]

I saw a list of RSA levers with part number assignments somewhere but I can't find it now.

I imagine Don Rivera can help you.

Airflow Performance contact page


**Edit ** Ah! found it!. Precision Home Page
Go here, click on SilverHawk Support, then Default Levers. I don't see a 2-1/4"

[Vansrv7arob]

Yeah 2" is the longest, I presume someone else has had this issue before, is there any alternatives like from car/ boat racing that might fit?

[Doug]

I think they are available from Precision Airmotive. Googling Silverhawk lead here, the default levers link leads to a range of part numbers.

http://www.precisionairmotive.com/silver_hawk_ex.htm

They to are limited to 2". I do recall seeing a photo of one extended with a section welded into to arm.

[Vansrv7arob]

Thanks everyone, looks like I'm going down the custom route, fingers crossed found someone who can mill the serrations with a special jig.